Countertop decal installation can be more difficult than it appears. It’s very important to follow the instructions below to ensure proper installation. If you have any questions, please reach out to WFR Central Marketing before starting your installation project! Again, it’s very important that we all use the proper installation method to ensure a professional look with no bubbles or rippling.

 

What You’ll Need:

• a clean flat surface to work on
• a flathead screwdriver (electric or handheld)
• self-tapping screws (if replacement screws are needed)
• a clean rag and cleaning solution on-hand, rags, and a hairdryer.
• a long/flat object like a credit card or squeegee that won’t scratch the surface of the decal

 

Countertop & Surrey Address / Location Decals Installation Instructions:

This is includes decals like your countertop Liability Waiver, Annual Pass, and Big Brothers Big Sisters partnership decals.

1. Peel off the old countertop decal.

Removing an old Decal:

• • Working slowly, pull up a corner of the decal, and begin to peel. It works best if you pull at a 45-degree angle.
  • A hair-dryer can help soften the adhesive, if needed, to pull up the graphic.
  • Once you have removed the decal, apply GooGone or cleaner you have on hand to remove any remaining residue, following the instructions on the bottle.

2. Use a rag and any cleaning solution you have on-hand to remove leftover adhesive residue.

3. Once clean, DO NOT SKIP THIS STEP: use a single-use alcohol wipe or cloth with isopropyl alcohol 70% or higher to remove any remaining residue from the GooGone or other cleaning product used in Step 2. Allow surface to dry fully.

4. To apply the new decal, peel back 1-inch of the backing from the short-side of the decal and line up the decal onto the correct spot. Press down firmly and then use an Annual Pass or Credit Card to smooth the decal while simultaneously pulling the rest of the paper out from under the decal.

5. Lastly, remove transfer tape off the top of the graphic (if applicable).

Watercraft Decal Installation Instructions:

This is includes decals like your countertop Liability Waiver, Annual Pass, and Big Brothers Big Sisters partnership decals.

1. Peel off the old or damaged watercraft decal.

Removing an old Decal:

• • Working slowly, pull up a corner of the decal, and begin to peel. It works best if you pull at a 45-degree angle.
  • A hair-dryer can help soften the adhesive, if needed, to pull up the graphic.
  • Once you have removed the decal, apply GooGone or cleaner you have on hand to remove any remaining residue, following the instructions on the bottle.

2. Use a rag and any non-oil-based cleaning solution you have on-hand to remove leftover adhesive residue.

3. Once surface is completely dry, carefully apply the new decal and smooth out surface ensuring the decal is straight and aligned correctly.